Traditional Japanese sweets tools are very expensive. We provide tools made with a 3D printer at reasonable prices so that anyone can enjoy making Japanese sweets.

Please read the following notes carefully and purchase after understanding and consent.

We use a industrial 3D printer to create high-quality, delicate tools. Since the products are not mass-produced but are made one by one, slight differences in size and texture may occur.

A 3D printer creates a model by piling up filamentous raw materials. For this reason, sliced layers are formed, and it is weak against lateral forces. Also, thread-like plastic pieces may be attached.

PLA is an eco-friendly plastic made by extracting natural materials such as corn. PLA+ is a material with higher toughness (tenacity) than PLA.

Due to the circumstances of the material manufacturer, the color may change without notice.

The smaller the Cutter, the more difficult it is to remove the dough from the mold. If you are not familiar with Cutters, choose the large size or use the medium size and Extrusion as a set.

The cutter is finished with extremely thin walls to make it easier to cut out the soft nerikiri dough. Do not use it with strong force as it may be damaged.

Do not use for hard dough, frozen dough, vegetables, etc. Also, do not use in an oven, microwave oven, or dishwasher.

We will ship in 3-5 days.

If the quantity is large, you may have to wait 6 days or more because it takes time to produce. If you have any concerns, please contact us in advance.

We use Click Post for deliveries within Japan. We will let you know the tracking number when we ship.

Use the International ePacket service. Delivery days will be slightly longer than EMS, but you can save a lot on delivery costs.

Delivery charges vary by region. Please select your region from the pull-down menu during checkout.

Please see the link below for delivery days after shipping.

https://www.post.japanpost.jp/int/deli_days/normal/kinki_en.html

We do not accept returns or exchanges regardless of the reason, such as damage during use or wrong order.

Please feel free to contact us if you have any questions.